dmesg - FX-4100 4.66
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-24-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38-Ubuntu SMP Tue May 1 16:18:50 UTC 2012 (Ubuntu 3.2.0-24.38-generic 3.2.16)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bd83c000 (usable)
BIOS-e820: 00000000bd83c000 - 00000000bd88a000 (ACPI NVS)
BIOS-e820: 00000000bd88a000 - 00000000bd893000 (ACPI data)
BIOS-e820: 00000000bd893000 - 00000000bdade000 (reserved)
BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS)
BIOS-e820: 00000000bdaef000 - 00000000bdb04000 (reserved)
BIOS-e820: 00000000bdb04000 - 00000000bdb06000 (ACPI NVS)
BIOS-e820: 00000000bdb06000 - 00000000bdb0f000 (reserved)
BIOS-e820: 00000000bdb0f000 - 00000000bdb15000 (ACPI NVS)
BIOS-e820: 00000000bdb15000 - 00000000bdb77000 (reserved)
BIOS-e820: 00000000bdb77000 - 00000000bdd7a000 (ACPI NVS)
BIOS-e820: 00000000bdd7a000 - 00000000bdf00000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100001000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 EVO, BIOS 1102 03/12/2012
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BDF00000 mask FFFFFFF00000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000140000000 aka 5120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3039MB, range: 1MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 3039M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3039MB, range: 1MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
e820 update range: 00000000bdf00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbdf00 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bdf00000
0000000000 - 0080000000 page 1G
0080000000 - 00bde00000 page 2M
00bde00000 - 00bdf00000 page 4k
kernel direct mapping tables up to bdf00000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 1G
kernel direct mapping tables up to 140000000 @ bdeff000-bdf00000
RAMDISK: 364ea000 - 3726d000
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000bd88a068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bd891df0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
ACPI: DSDT 00000000bd88a140 07CA9 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bdb0ff80 00040
ACPI: APIC 00000000bd891ee8 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bd891f88 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bd891fc8 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000bd892000 00194 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Initmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [000000013fffb000 - 000000013fffffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x000bd83c
0: 0x000bdd7a -> 0x000bdf00
0: 0x00100001 -> 0x00140000
On node 0 totalpages: 1038670
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 756226 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 258047 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bd83c000 - 00000000bd88a000
PM: Registered nosave memory: 00000000bd88a000 - 00000000bd893000
PM: Registered nosave memory: 00000000bd893000 - 00000000bdade000
PM: Registered nosave memory: 00000000bdade000 - 00000000bdaef000
PM: Registered nosave memory: 00000000bdaef000 - 00000000bdb04000
PM: Registered nosave memory: 00000000bdb04000 - 00000000bdb06000
PM: Registered nosave memory: 00000000bdb06000 - 00000000bdb0f000
PM: Registered nosave memory: 00000000bdb0f000 - 00000000bdb15000
PM: Registered nosave memory: 00000000bdb15000 - 00000000bdb77000
PM: Registered nosave memory: 00000000bdb77000 - 00000000bdd7a000
PM: Registered nosave memory: 00000000bdf00000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
Allocating PCI resources starting at bdf00000 (gap: bdf00000:40d00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83072 r8192 d23424 u262144
pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1018185
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 3cf0000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 3926996k/5242880k available (6567k kernel code, 1088200k absent, 227684k reserved, 6636k data, 920k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:1288 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 4615.477 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 9230.95 BogoMIPS (lpj=18461908)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00bdf00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20110623
ftrace: allocating 27050 entries in 107 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD FX(tm)-4100 Quad-Core Processor stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#2
smpboot cpu 2: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
#3
smpboot cpu 3: start_ip = 98000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 4 CPUs
Total of 4 processors activated (36922.98 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at bd83c000 (319488 bytes)
PM: Registering ACPI NVS region at bdade000 (69632 bytes)
PM: Registering ACPI NVS region at bdb04000 (8192 bytes)
PM: Registering ACPI NVS region at bdb0f000 (24576 bytes)
PM: Registering ACPI NVS region at bdb77000 (2109440 bytes)
print_constraints: dummy:
RTC time: 18:48:18, date: 05/28/12
NET: Registered protocol family 16
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:16.0: reg 10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:16.2: reg 10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
pci 0000:01:00.0: [1002:68ba] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
pci 0000:01:00.1: reg 10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:00.0: [197b:2362] type 0 class 0x000101
pci 0000:04:00.0: reg 10: [io 0xc040-0xc047]
pci 0000:04:00.0: reg 14: [io 0xc030-0xc033]
pci 0000:04:00.0: reg 18: [io 0xc020-0xc027]
pci 0000:04:00.0: reg 1c: [io 0xc010-0xc013]
pci 0000:04:00.0: reg 20: [io 0xc000-0xc00f]
pci 0000:04:00.0: reg 24: [mem 0xfe810000-0xfe8101ff]
pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.0: PME# disabled
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:05:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:05:00.0: reg 10: [mem 0xfe700000-0xfe707fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:06:05.0: [168c:002d] type 0 class 0x000280
pci 0000:06:05.0: reg 10: [mem 0xfe600000-0xfe60ffff]
pci 0000:06:05.0: PME# supported from D0 D3hot
pci 0000:06:05.0: PME# disabled
pci 0000:06:06.0: [13f6:8788] type 0 class 0x000401
pci 0000:06:06.0: reg 10: [io 0xb000-0xb0ff]
pci 0000:06:06.0: supports D1 D2
pci 0000:06:07.0: [1106:3044] type 0 class 0x000c00
pci 0000:06:07.0: reg 10: [mem 0xfe610000-0xfe6107ff]
pci 0000:06:07.0: reg 14: [io 0xb100-0xb17f]
pci 0000:06:07.0: supports D2
pci 0000:06:07.0: PME# supported from D2 D3hot D3cold
pci 0000:06:07.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000bd83c000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Freeing initrd memory: 13836k freed
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xffc00000-0xffffffff]
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0290-0x02af]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
system 00:03: [io 0x0290-0x02af] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0c: [mem 0xfec20000-0xfec200ff]
system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xfed00000-0xfed003ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:06.0: BAR 15: assigned [mem 0xd0100000-0xd01fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:00.0: BAR 6: assigned [mem 0xd0100000-0xd010ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 04-04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:06.0: bridge window [mem 0xd0100000-0xd01fffff pref]
pci 0000:00:07.0: PCI bridge to [bus 05-05]
pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:14.4: PCI bridge to [bus 06-06]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 2 [mem 0xd0100000-0xd01fffff pref]
pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:16.0: PCI INT A disabled
pci 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:16.2: PCI INT B disabled
pci 0000:01:00.0: Boot video device
pci 0000:03:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
pci 0000:03:00.0: PCI INT A disabled
pci 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
pci 0000:05:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1338230899.576:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 7825
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
ahci 0000:04:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:04:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfe810000 port 0xfe810100 irq 51
ata8: SATA max UDMA/133 abar m512@0xfe810000 port 0xfe810180 irq 51
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb09000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:03:00.0: irq 46, io mem 0xfe900000
xhci_hcd 0000:03:00.0: irq 72 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
xhci_hcd 0000:05:00.0: setting latency timer to 64
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:05:00.0: irq 50, io mem 0xfe700000
xhci_hcd 0000:05:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 81 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 12:794:848
rtc_cmos 00:05: setting system clock to 2012-05-28 18:48:20 UTC (1338230900)
powernow-k8: Found 1 AMD FX(tm)-4100 Quad-Core Processor (4 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: WDC WD5002AALX-00J37A0, 15.01H15, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5002AALX-0 15.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS70, GN01, max UDMA/100
ata3.00: configured for UDMA/100
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS70 GN01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1608k freed
Freeing unused kernel memory: 1196k freed
udevd[116]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 82 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000658000, 54:04:a6:12:9a:d0, XID 0c900800 IRQ 82
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
firewire_ohci 0000:06:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
usb 4-3: new low-speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 4615.449 MHz.
Switching to clocksource tsc
firewire_ohci: Added fw-ohci device 0000:06:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input2
generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
usb 4-5: new low-speed USB device number 3 using ohci_hcd
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12060657
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12060656
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12060610
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12060609
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12060622
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8388632
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 8388627
EXT4-fs (sda1): 7 orphan inodes deleted
EXT4-fs (sda1): recovery complete
firewire_core: created device fw0: GUID 001fc60000192548, S400
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input3
generic-usb 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-5/input0
usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
Initializing USB Mass Storage driver...
usbcore: registered new interface driver uas
scsi8 : usb-storage 9-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6
scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg2 type 0
scsi 8:0:0:1: Attached scsi generic sg3 type 13
sd 8:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/465 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 47 00 10 08
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3
sd 8:0:0:0: [sdb] No Caching mode page present
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Attached SCSI disk
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[349]: starting version 175
lp: driver loaded but no devices found
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3755 MBytes.
[fglrx] vendor: 1002 device: 68ba count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
type=1400 audit(1338230911.894:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=432 comm="apparmor_parser"
type=1400 audit(1338230911.894:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
type=1400 audit(1338230911.894:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"
wmi: Mapper loaded
ses 8:0:0:1: Attached Enclosure device
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
cfg80211: Calling CRDA to update world regulatory domain
snd_oxygen 0000:06:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xbafe00 already in use
snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
snd_hda_intel 0000:01:00.1: irq 83 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: setting latency timer to 64
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (735) killed by TERM signal
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1338230912.462:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=841 comm="apparmor_parser"
type=1400 audit(1338230912.466:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=842 comm="apparmor_parser"
type=1400 audit(1338230912.466:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=848 comm="apparmor_parser"
type=1400 audit(1338230912.466:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=846 comm="apparmor_parser"
type=1400 audit(1338230912.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=846 comm="apparmor_parser"
type=1400 audit(1338230912.470:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
type=1400 audit(1338230912.470:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
ppdev: user-space parallel port driver
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
Adding 2097148k swap on /var/swap. Priority:-1 extents:13 across:4153340k
ath9k 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900111e0000, irq=20
cfg80211: Calling CRDA for country: CN
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: CN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011800000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
init: plymouth-splash main process (1327) terminated with status 1
fglrx_pci 0000:01:00.0: irq 84 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1341
[fglrx] Firegl kernel thread PID: 1342
[fglrx] Firegl kernel thread PID: 1343
[fglrx] IRQ 84 Enabled
[fglrx] Gart USWC size:1224 M.
[fglrx] Gart cacheable size:485 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f92b000, size:3d5000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
mount: sending ioctl 5310 to a partition!
mount: sending ioctl 5310 to a partition!
hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.
wlan0: authenticate with 28:cf:da:b5:59:79 (try 1)
wlan0: authenticated
wlan0: associate with 28:cf:da:b5:59:79 (try 1)
wlan0: RX AssocResp from 28:cf:da:b5:59:79 (capab=0x431 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: NZ
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: NZ
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 3000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
wlan0: no IPv6 routers present
usb 9-1: USB disconnect, device number 2